MPG Antifreeze Heat Transfer Liquid

Size:

Color:

Product Short Description: Heat Transfer water mix propylene glycol liquid
Product Technical Specification:

 

Main Ingredients   : PROPYLENEGLYCOL (1,2-) 94%
Inhibitors and
water
 
6
Inhibitors and water
 : 6 %
Colour Bright : Clear
pH of solution : 8.8
Odour            : PRACTICALLY ODOURLESS
Solubility in water        : SOLUBLE
     
Boiling point         : 162 oC
Freezing point       : -32 oC
Viscosity     : 58.1 cp at 20 oC
Reverse Alkalinity         : Minimm 15.0 ml
Vapour pressure    : .07 mbar at 20oC
Skin absorption/irritation       : YES
TLV       Country     :  
Pollution category    1994       : III
 

 

Remarks:

Propylene glycol is tolerated well by the skin and shouldn't cause redness or irritation. Propylene glycol is a penetration-enhancing humectant.
 

Propylene Glycol USP is a widely used ingredient in pharmaceutical, food, cosmetic, personal care, flavors and animal feed applications; an overview of typical uses of Propylene Glycol USP as below.It must be emphasized that it is the user’s responsibility to consult area and country-specific regulations for details of approved use.

  1. Pharmaceuticals - Solvent for active ingredients in oral, and topical products.
     
  2. Cosmetics & Personal Care - Solvent, coupling agent, carrier, emulsion stabilizer, softening agent, viscosity modifier and humectant in many types of cosmetics and personal care products such as skincare, sun care, shampoo, bath/shower products, toothpastes, mouthwashes, shaving products and baby care products.
     
  3. Flavors & Fragrances - Solvent and extraction solvent of flavors and fragrances for applications in food, beverages, perfumes and cosmetics.
     
  4. Food - Various applications as a direct food additive (E 1520) such as a carrier or carrier solvent for colors, emulsifiers, antioxidants and enzymes (in Europe with maximum 1 g/kg in human foodstuffs), and humectant and stabilizer in fruits, vegetables and bakery goods (except in Europe). Propylene Glycol USP is also applied in indirect contact food applications, such as a low temperature heat-transfer fluid in the brewing, dairy and ice cream industries and for food storage facilities, an equipment cleaner fluid or a solvent for printing inks.
     
  5. Pet foods & Animal Feed - Humectant, emulsifier, preservative, solvent foradditives, energy source and aid for prevention of ketosis (acetonemia) in dairycattle. In EMEA a specific tailor made Propylene Glycol Animal Feed is offered forthis application.
Images: Alt


Oil Based Mud Lubricant GLOLUBE

Size:

Color:

Product Short Description: Oil Based Mud Lubricant is an oil-soluble additive specifically engineered for use in all invert-emulsion drilling fluids to decrease the coefficient of friction.
Product Technical Specification:

Physical Properties:

Appearance                             : Brownish Black Liquid
Specific Gravity  : 0.90 to 0.95
PH  : Neutral
Solubility  : Slightly Dispersible in water, Soluble in Oil
Thermal Stability :  >160oC
Lubricity Coefficient :  <0.20
Remarks:
Images: Alt


DI Ethylene Glycol

Size:

Color:

Product Short Description: Sweet-tasting liquid commonly used in antifreeze, brake fluid, cigarettes, and some dyes also as a solvent for lacquer, paint and varnish, coupling printing inks, and water-based coating.
Product Technical Specification:

Description: Diethylene Glycol

Test Description

Specification Limits

Min. Max.

Unit

of Measure

Test

Method

Diethylene Glycol

99.5

%(w/w)

Water

0.1

%(w/w)

Acidity (as acetic acid)

0.005

%(w/w)

Iron

0.5

ppm

Ash

0.005

%(w/w)

Appearance

Clear

Visual

Specific Gravity 20/20oC

1.117

1.119

Distillation Range at 760 mm Hg

242

250

oC
CAS number  : 111-46-6
Molecular Formula : C4H10O3
Formula  : CH2OHCH2OCH2CH2OH
Odour   : PRACTICALLY ODOURLESS
Solubility in water   : COMPLETE
Density   : 1.118   at 20   oC
Boiling point  : 245oC
Melting point  : -7 oC
Viscosity  : 30 cp at 25 oC
Flashpoint   : 124 oC
Explosive limits    : 1.6 – 10.8 Vol%
Vapour pressure   : .01 mbar at 20 oC
Skin absorption/irritation       : YES
TLV       Country   :  
Pollution category    1994     : D
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Spotting Fluid Stuck Breaker

Size:

Color:

Product Short Description: RXSOL Spotting Fluid Stuck Breaker is environmentally friendly highly effective stuck Pipe spotting fluid for oil and Water Based muds. It is liquid blends of surfactant and lubricant,
Product Technical Specification:

Physical Properties: 

PROPERTIES                        

VALUE

Appearance

Brownish oily liquid

Specific Gravity

0.90-0.98

PH

4.0-6.5

Miscibility

Completely miscible in diesel and Dispersible in Water

Thermal Stability

>160oC

Flash Point

>1100C
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Wax Dispersant RXSOL

Size:

Color:

Product Short Description: RXSOL Wax Dispersant is a solvent based products
Product Technical Specification:

Typical Physical Properties

Appearance :Yellow Liquid
Specific Gravity : 0.8 at 15.5 °C
Flash Point : 65°C
pH : Not applicable
Freeze Point : -20°C
Ionic : Character Anionic
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


BARIUM CARBONATE

Size:

Color:

Product Short Description: BARIUM CARBONATE LR
Product Technical Specification:
Physical state at 20 °C :  Solid
Odour threshold :  No data available
pH value :  Not applicable.
Melting point [°C] :  811°C
Decomposition point [°C] :  1300°C
Critical temperature [°C] :  N/A
Auto-ignition temperature [°C] :  N/A
Flammability (solid, gas) : N/A
Flash point [°C] :  N/A
Boiling point [°C] :  N/A
Initial boiling point [°C] :  N/A
Final boiling point [°C] :  N/A
Evaporation rate :  N/A
Vapour pressure [20°C] :  N/A
Vapour pressure mm/Hg :  N/A
Vapour density : N/A
Density [g/cm3] :  4,43
Relative density, gas (air=1) : N/A
Relative density, liquid (water=1) : N/A
Solubility in water [% weight] :  Slightly soluble
Solubility in water :  N/A
Log Pow octanol / water at 20°C :  No data available.
Solubility : N/A
Viscosity at 40°C [mm2/s] :  N/A
Explosive properties : N/A
Explosion limits - upper [%] :  N/A
Explosion limits - lower [%] : N/A N/A
Oxidising properties : No data available.
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Exxsol D80

Size:

Color:

Product Short Description: Exxsol D80 Fluid is characterized as "de-aromatized" aliphatic hydrocarbon solvent.
Product Technical Specification:

Exxsol D80 Fluid is a combustible material, has a relatively high vapor pressure, and should be handled only with adequate ventilation and in areas where ignition sources have been removed (e.g. open flames, static electricity sources, unprotected light switches). The flash point is approximately 176ºF /80ºC.

 

Form         Liquid
Colour Colourless
Odour Mild Petroleum/Solvent
Odor Threshold No Information Available
pH Not Applicable
Boiling Point  200°C (392°F) - 250°C (482°F)
Flash Point >=75°C (167°F) [ASTM D-93]
Evaporation Rate (n-butyl acetate = 1): 0.1
Flammability (solid, gas) Not Applicable
Secific Gravity 798 kg/m3
Decomposition Temperature No information available
Solubility in Water Not Soluble
Viscosity No information available
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Vanadium Inhibitor Carboxylate

Size:

Color:

Product Short Description: 20-30% Magnesium Carboxylate Inhibitor
Product Technical Specification:

TYPICAL PROPERTIES :

Magnesium content % wt.         : Min. 20%
Appearance : Creamy Viscous Liquid
Density at 20 °C : 1.25 - 1.30 g/ml
Particulate Matter : 99.90%, < 2 microns
Sediment : 0.05%
Oil Soluble : = Completely Soluble
Viscosity@40°C : =<60cST
Freezing Point : <-10
Flash Point (°C) : 62°
Hydrolytic Stability : Good
Hydro Stability : Excellent
Water : Nil
Ca :< 500 ppm
Na+K :< 50 PPM
Pb : < 1 ppm
V : 1 ppm

 

Remarks:

PRODUCT FETURES :

  • RXSOL Vanadium Inhibitor Carboxylate is a carboxylate base Vanadium Inhibitor with superior performance with water tolerance and asphaltene suspension in Heavy Fuel Oil or Crude Oil.
  • RXSOL Vanadium Inhibitor Carboxylate is the result of years of research and development. It is a high quality, high purity oil soluble vanadium inhibitor that is manufactured in our latest technology equipped plant.
  • Contains Magnesium 20% by weight that provides immediate mixing with Heavy Fuel Oil.
  • Intended to increase the melting point of ashes.
  • Prevents hot corrosion in gas-turbines and reduces hard deposit build-ups.
  • RXSOL Vanadium Inhibitor Carboxylate is manufactured according to strict gas turbine anti-corrosion standards.
  • Good stability, hydrolyzed, non-volatile, low pour point and non-toxic advantages. To be used in different type  of gas turbines which consume crude oil, heavy oil and light oil.
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Vanadium Inhibitor Polymerised

Size:

Color:

Product Short Description: RXSOL ORG VI 28 Vanadium Inhibitor is used in blending crude and heavy oils with high concentrations of ash and corrosives that leads to encrustation and fouling.
Product Technical Specification:

PROPERTIES

Parameters

   Values
Magnesium, wt% :  28-30
Specific Gravity : 1.3 - 1.45

 Viscosity @20°C, cSt

 :

1300 max or suitable for injection pump
Na + K, ppm :

 <2000
Ca, ppm : 10000
 V+Pb, ppm : 20 -50
Remarks:

#vanadiumINHIBITOR_supplier
#vanadiumINHIBITOR_manufacturer
#vanadiumINHIBITOR_kuwait
#vanadiumINHIBITOR_MUSCAToman
#vanadiumINHIBITOR_dubaiUAE

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


AMMONIUM Bifluoride Crystal

Size:

Color:

Product Short Description: If the acid used in the working mixture of hydrofluoric acid (45%), it would take 1.55 times more than if we use a dry ammonium bifluoride.
Product Technical Specification:


CAS Number‎: ‎1341-49-7
UN number‎: ‎1727
Boiling point‎: ‎240 °C (464 °F; 513 K)
EC Number‎: ‎215-676-4
Molecular Weight: 57.04 g/mol
Molecular Formula: NH4HF2

Ammonium bifluoride [NH4.HF2]

Melting point :124.6°C (Sublimes at higher temperature) 
Boiling point : 239.5°C
When dissolved in water, cooling takes place. Material is Hygroscopic at 50% humidity.

Analysis

Appearance : White crystalline solid (Orthorhombic crystals) 

NH4HF2 :  98.76%*
(NH4)2SO4 : 0.05%
(NH4)2SiF6  :0.20%
Moisture  :0.59%

Solubility in water  : 60.2 g at 20°C and 156.4g at 60°C per 100ml of water
Solubility in HCl  :  10% (w/v) sample is soluble in 15% (w/w) of HCl at 25°C

*Assay: Weigh accurately about 1.0gm of Ammonium bi fluoride sample. Dissolve it in 100ml distilled water. Titrate with about 1N NaOH. Use Phenolphthalein as indicator. End point is Colourless to Pink. 

% acidity as HF =  A / B

1st calculate Consumption of NaOH, B.R. X  Normality of NaOH X  0.02 X 100  = A
Then Divided the result with " Weight of the sample "   = B

%NH4HF= %acidityasHFx57 /  20

Remarks:

Ammonium bifluoride is a white crystal salt chemically when ammonium bifluoride comes in contact with water resulting with the formation of HF.  It is used to brighten aluminum and other metals.

Images: Alt
stock-clearance.png