Categories: Tank Cleaner-20
Images: Alt
Product Short Description: Designed for the removal of heavy mineral oils and greases, dopes, additives, lubricants, asphalt, distillation residues, coal tar, several synthetic resins, paraffines (e.g. slackwax), inert gas soot, vegetable,fish and animal oils and fats, fatty acid
Product Description:

Powerful & Concentrated Emulsifying Cleaner, Classified Heavy-Duty Degreaser for Oil, Grease, and Sludge Removal. Tankclean ECO is concentrated formulation designed to break down and emulsify heavy oils, grease, carbon deposits, removal of coaltar, crude benzene, lube oils, Petroleum distillate, pyrolyze gas oil, bitumen & similar and petroleum-based sludge. It is especially effective in demanding environments such as marine vessels, refineries, engine rooms, and industrial plants.

Product Application:

Common Recommended Dilution of Tank Clean ECO:

  • Heavy Deposits: Use undiluted or 1:1 with water

  • Light Cleaning: Dilute up to 1:10 depending on contamination level

 

RXSOL Tankclean Eco is designed for the removal of: heavy mineral oils and greases, dopes, additives, lubricants, asphalt, distillation residues, coal tar, several synthetic resins, paraffines (e.g. slackwax), inert gas soot, vegetable,fish  and animal oils and fats, fatty acid and greases, crude palm oil, styrene, palm fatty acids.

Product Dose:

Directions of use
Cleaning of cargo and storage tanks by means of recirculation method.

Pre Wash :-
Before cleaning with RXSOL Tankclean ECO, it is necessary to prewash the tanks with hot or cold water, depending on the type of cargo.

Recirculation Method ::: Refer Below.

Direct Injection:-
Inject 0.1 to 0.2 litres of Tankclean ECO per every 100 litres of water into the washing system.Maintain cleaning temperatures between 10-60 °C (depending on type of cargo).Cleaning time 2 to 6 hours, followed by thorough rinsing with fresh hot water.

Product Note:
Description
Tank Cleaner Eco is “the strongest there is” water-based, non-caustic cleaning and degreasing agent. It is based on
the latest and most powerful biodegradable surface-active and emulsifying agents. It contains fatty alcohol ethoxylates metasilicates and complexing agents. It works well in hard, soft, ambient and hot water. It is ideal
for soot removing and cleaning of extremely dirty tanks after Mineral Oils/Petroleum Products. Note. All cleaning
chemicals have reduced effect with seawater.
Product benefits, Application & Features:
• Non-Flammable • Suitable in sea & fresh water
• Leaves no film in the cargo tanks • Biodegradable
• Easy to apply. Effective and economical in use • Contains no ethoxylated nonylphenol (NF)
Product Technical Specification:

Properties:
Specific gravity (at 20°C) : 1.05
Flash point (10%)            : Non Flammable
pH (10%)                         : 12.0 - 12.5
Colour                             : Clear
Odour                              : Citrus

 

Application Methods For Tank Clean ECO:

  • Spray

  • Brush

  • Soak

  • Circulation or high-pressure wash systems

Remarks:
During Tank Cleaning operation, Re-circulation method can be considered one of POPULAR METHOD. TIPS for uses of TANK CLEAN ECO.
 1. First of all remove and strip all residue manually from Tank bottom and wall, Then flush tanks with the copious amount of seawater if possible by using the high-pressure machine to remove remaining cargo to slop. (As per MARPOL 78/73)
 
 2. Then recirculate hot water inside the tanks at least for 2-10 hr, this will helps to remove oily-mud and residues in the coating/steel.
 
 3. Then again take fresh hot water inside the tank and use Tank Clean ECO 0.5 - 2 %. And continue recirculation 2-8 hr. And continuously try to maintain temperature of 60 - 65 Degree Centigrade. Hot recirculation will improve the cleaning result. Do not overheat, as this may burn the cargo. otherwise, The water is heated by means of the heating coils, cargo heat exchanger or Butterworth heater.The tanks are washed by means of a loading pump, after which the solution used is recycled to the mixing tank. One solution is most often used to wash 1 – 4 tanks.Tankclean ECO must be recirculated as a 0.2 – 0.5 % emulsion (dependent on the nature of the contamination). Allow this emulsion to circulate for 2 – 4 hours at the temperature of 10-60 °C (depending on the type of cargo).
 
 4. Again Flush entire tanks with a large amount of warm seawater (2-3 hr) to remove any residues of Chemicals.
 5. Flush tanks with freshwater to remove salts, mop and dry.


RXSOL TANK Clean ECO is added to a mixing tank containing sufficient quantity of water in order to obtain a good recirculation.
 
prod_useful_area:
ZINC coating TANK cleaning - Zinc structure is porous, a prolonged pre-cleaning with lower temperatures is highly advisable.
 
HEAVY DUTY TANKCLEANER MANUFACTURED FROM NATURAL RAW MATERIALS WHICH CONTAINS NO CHLORINATED OR AROMATIC HYDROCARBONS
• More effective than solvent cleaners.
• Non-toxic and environmentally safe.
• Safe to use because of its high flashpoint.
• Completely biodegradable.
• Replaces most conventional tankcleaners and cleaners.
Product Supply Location:

Tank clean ECO supplier in Mumbai, Nhava Seva, Surat - Hazira, Kandla - Deen Dayal Port, Mundra, Sikka, Jamnagara, Hazira Surat, Gandhidham, Manglore, Goa, Visakhapatnam - Gangavaram, Chennai - Ennore, Kolkata - Haldia - Buz Buj, Paradip. We are also one of largest tanclean ECO supplier in Fujairah, Dubai, Sharjah, Abu Dhabi - Middle East, UAE, Sohar, Muscat Oman

stock-clearance.png